Question: How Soon Can You Put Thompson Water Seal On Treated Wood?

Can you put Thompson Water Seal on treated wood?

However, most of the water-repellent sealers sold at home centers, paint stores and lumber yards are suitable for pressure-treated wood as well as other outdoor woods such as cedar and redwood.

The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use..

Can pressure treated wood get rained on?

Pressure treating does make wood rot resistant. But — it doesn’t make wood water resistant. Pressure treated wood still soaks and looses moisture. … The water repellent will keep the boards looking bright and will minimize the uptake of water.

How much does Thompson’s Water Seal Cover per gallon?

That determines how many gallons of stain are required (each gallon covers up to 400 square feet).

What is the best sealant for pressure treated wood?

7 Best Deck Sealers for Pressure Treated Wood- Reviews & Buyer’s GuideReady Seal 515 5-Gallon Pail Pecan Exterior Wood Stain and Sealer.Thompson’s Water Seal 041851-16 Transparent Stain, Cedar. … 3#1 Deck Premium Semi-Transparent Deck Stain.Ready Seal 505 5-Gallon Pail Light Oak Exterior Wood Stain and Sealer.More items…

Is it better to stain or paint pressure treated wood?

Because of the pressure-treating process, exterior paint is less likely to adhere to pressure treated wood and more likely to peel. Some experts advise staining or sealing over painting, but paint can be successfully applied by following extra precautions.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What happens if you stain wet pressure treated wood?

If the wood is wet it cannot absorb the paint. Instead it dries on top of the wood with very little, if any adhesion. Thus, in a very short time frame you will have paint failure. Your best bet is to wait six months.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

What temperature can you use Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

Can you put a sealer on pressure treated wood?

Although treated wood is protected against decay and termite attack, the application of a water-repellent sealer to all exposed wood surfaces is recommended upon completion of construction. Treated Southern Pine lumber will accept a finish similar to untreated material. …

What happens if you stain new pressure treated wood?

Without waiting for the wood to dry, stain and sealant would not penetrate the wood properly, diminishing its ability to protect the wood from weather damage.

Why is my Thompson Water Seal white?

From the Thompsons site: Apply by brush, roller, dipping, or sprayer. A garden “pump-up” style sprayer is the simplest method. Product will appear milky white during application, but will dry clear. If puddling of product occurs, remove within 15 minutes by redistributing to dry areas or wiping off.

How long do you have to wait to seal pressure treated wood?

A newly built deck that uses pressurized wood will need time to dry completely before a sealer can be applied. The chemicals used to treat the wood leave moisture behind, and depending on the climate, it can take anywhere from a few weeks to a few months until it’s dry enough to seal.

What happens if you seal pressure treated wood too soon?

And it’s wrong. The truth is as soon as the wood is dry enough, it is ready to be stained. There is no waiting period for today’s pressure treated wood to let chemicals leach out. Waiting too long to stain and protect your deck means the wood loses more of its ability let the stain adhere.

How long should pressure treated wood dry before painting?

A one month minimum dry time is recommended. That said, I’d wait as long as the painting season permits. If you have three months before it will get cold down there, then wait until then. It’s important to have three good, consecutive dry days before applying the stain when ultimately decide to do it.

Is Thompson’s Water Seal good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

How do you keep pressure treated wood looking new?

If you’re looking to maintain the original color of pressure-treated wood longer, you will need to not only clean your deck periodically, but also apply a water-repellent finish with an ultraviolet stabilizer. The stabilizer will not prevent eventual discoloration, but will slow the process.